Software v7.1 version (Stable)
2023-02-13
What's new in software v7.1 (2023-03-17):
- MCM "Erase emission faults" operation (in Action tab; License MB EXTRA)
- MD1CE100 (MAN, Iveco, Kamaz) memory operations via DC (ECU until 2021)
- MD1CE101 (Iveco) memory operations via DC (GPT mode) (ECU until 2021)
- "PLD MANIPULATED FIX" operation added to fix fault 4058 in MB MR (PLD)
- for Mercedes over OBD now showing VIN from INS/GM/FPS units
- (MAN) DC2U-EDC17+PTM cable support (allows to make pairing on the bench)
- (MB) GSII memory operations over OBD (FLASH only write, EEPROM read/write)
-
* new ECU versions: MAN PTM 36.25805-7022 memory operations
* new ECU versions: Kamaz EBS3 (Wabco) diagnosis version 9010700, 9010701, 9070B00 memory operations
* new ECU versions: EDC17CV41 (Ford Cargo) GPT memory operations (use Iveco tab)
* new ECU versions: EDC7C3 firmware version 321 - New ECU versions: CPC4 diagnosis version 010507 (boot) memory operations)
- "Dataset" renamed to "Hardware part number" (for all Mercedes ECUs)
Changes:
Licenses merged together :
- MB_MR, MB_MR+ -> MB MR
- MB_GSII_DC, MB_GSII_BSL -> MB GSII
- MB_FR, MB_CPC_BSL, MB_FR_BSL -> MB FR/CPC
- MB_CPC3_DC; MB_CPC3_JTAG; MB_CPC3_OBD -> MB CPC3
- MB_CPC3Evo_DC; MB_CPC3Evo_JTAG ; MB_CPC3Evo_OBD -> MB CPC3Evo
- USA_CPC4_DC, USA_CPC4_OBD, US_CPC4_TC1796_BSL -> MB CPC4
- MB_EXTRA, MB_ADM_EXTRA, MB_CPC3_EXTRA -> MB EXTRA
- MAN_FFR, MAN_FFR_BSL -> MAN FFR
- MAN_PTM_DC; MAN_PTM_JTAG; MAN_PTM_OBD -> MAN PTM
- ANDROID removed. VEI device will work with Android and iOS apps for free.
Note: if device had license CPC3_DC, from v7.1 device will get merged MB_CPC3 license, that includes functions of MB_CPC3_DC; MB_CPC3_JTAG; MB_CPC3_OBD. Free of charge. Valid Update/support subscription is requested.
Fixed:
Fixed:
- VeDoc, IVECO PIN calculations log output was fixed (had extra memory info)
- CPC4 BSL connect fixed (always failed with "error 3.8")
- PTM internal FLASH write over DC/OBD (in some cases was "error 0.3" after 38% or 39% done)
- Immo off for PTM 81.25805-7140 (was "error 0.3")
- MD1 faults operation after reconnecting (fault operations remained disabled even after "Detect control unit" pressed)
- "Analyze and read all" save successfully read dumps (before all results were lost in case of any error)
- MR KEYS, VeDoc, PLD manipulation fix operations (was "internal error")
- MR, EDC7 memory operations should be more stable now (was sporadic "error 3.5" before)
- PTM JTAG "Analyze and read all" operation returned same two flash files.
- connect to Mercedes bus via OBD (was "error 0.3" in some cases)
- "Analyse and read all" gave "error 0.3" if FLASH read failed
- BSL connect for MCM2 (was "error 3.7" before)
- MB FR hardware class 0 FLASH memory operations (always was "unsupported FLASH chip" error)